Kinedyne Lever Chain Binder for 5/16" - 3/8" Chain - 10036

Product Overview

Warnings

• WARNING: Load binder's working load limit must be equal or greater than working load limit of chain.
• WARNING: Kinedyne Chain Binders must not be used with cheaters bars or other handle extenders to tension load. When required, Kinedyne recommends the use of a Kinedyne Combination Winch Bar for Kinedyne Lever Chain Binder load release only.
• WARNING: Kinedyne Chain Binders are intended to be used by qualified, trained personnel in accordance with applicable load securement standards. Refer to WSTDA-T-6, FMCSA, NACM, and all other applicable Federal, State, Provincial and industry regulations for load securement requirements. Kinedyne Chain Binders should be matched with equivalent chain size, chain WLL and grade of chain. Never exceed the working load limit (WLL) of any kinedyne Chain Binder. The WLL of any tie-down assembly is only as strong as its weakest component, including the attachment points. Subjecting any Kinedyne Chain Binder to loads beyond its WLL can result in severe personal injury or death and/or damage to cargo. The design factor is based on destructive laboratory controlled testing, which will not be exactly duplicated during actual load and use. Kinedyne Chain Binders must not be used with cheater bars or other handle extenders to tension load. When required, Kinedyne recommends the use of a Kinedyne Combination Winch Bar for Kinedyne Lever Chain Binder load release only. Ensure load is stable before tightening or releasing tension.